Google er din ven - her er copy/paste med løsningen:
1. Download the last version of the Intel SSD Toolbox and install it in your Windows Hard Drive.
2. Please note that the Intel SSD Toolbox instructions to unlock the Security Freeze Lock are outdated. I followed and it did not unlock. Please note that in my previous post I had erased the SSD partitions with Windows 7 disk Management.
2.1 So your advice Phil_I was the correct one.
I turned off the Desktop, open it,
take out the SATA cable of the SSD,
then turn on the Desktop,
enter in the BIOS, set "Hot Plug" enabled for the SSD (P1), F10 to save the changes and
when the Windows logo appeared in the Windows 7 startup I plugged in the SATA cable in the SSD drive.
3. I ran Intel SSD Toolbox and this time it was able to do the secure erase in order to have the SSD in the original conditions. It took a minute.
4. This time with the SSD like new, I was able to reinstall LXDE
4.1 Formatting the 223,7GB available and installing LXDE took about 5 minutes.
4.2 Be carefull because the Grub bootloader takes as default for boot device the first disk, the Windows disk, in case of a mistake, Grub will write the MBR and will get "Error Bootmgr is missing" and Windows 7 will not boot.
4.2.1 Use your Windows installation disk but do not reinstall, only repair, it might require various attempts. See this link.
4.3 In my case, it also automatically created the entry in the boot menu to have the option to boot from the Windows 7 drive, and it worked fine.
5. In my oppinion Intel should have an administrator password in the Intel SSD Toolbox so we can have the possibility to modify the bits for "Security Freeze Lock" and "Hardware encryption" among others.
Hope this can help someone else.
--
msn via email
i7 2600K, 16GB 1600mhz ram, GTX 570, ASUS Z68, 120GB SSD, 120hz 23" LED plus div.
Selvfølgelig har jeg konsulteret google før jeg spilder din tid !!!
Det virker bare ikke med mit motherboard. Ser ud til iflg. google at jeg skal sætte controlleren til IDE, men så booter den ikke !.
Ser ud til jeg må prøve med en ældre pc med en mere simpel controler, da denne funktion er for at virus/malware ikke kan slette HD'en. Og min controller lader sig åbenbart ikke narre af at man først tilslutter drevet efter boot/initalisering af drev...
--